Previous
Next
Installing an electric strike is a lot more affordable than you may think and it provides an unmatched level of security. Electric strikes can be installed on a metal or wooden door frame and can be set to be remotely unlocked and locked by a push of a button. Madison Electric Strikes are an excellent access control device used for doors. It replaces the fixed strike faceplate often used with a latchbar (also known as akeeper). Like a fixed strike, it normally presents a ramped surface to the locking latch allowing the door to close and latch just like a fixed strike would.
However, an electric strike’s ramped surface can, upon command, pivot out of the way when the lock on the door is in the locked position and the door is opened, allowing a user to open the door without operating the mechanical lock or using a mechanical key. After the door is opened past the keeper, the keeper returns to its standard position and re-locks when power is removed or applied, depending upon the strike’s configuration.
Electric strikes are sometimes equipped with buzzers that allow someone outside the door to hear when the door is open. The buzzing noise is typically made by applying alternating current (AC) to the strike instead of direct current (DC). When using a DC powered strike, a buzzer accessory can be added to create the buzzing noise, if desired.
There are many manufacturers of strikes, and there are many things that have to be considered when buying one, i.e., type of jamb, type of locking hardware, whether one requires fail-secure or fail-safe, length of latch, depth of jamb, voltage requirements and the length of the faceplate.
Electric strikes are generally available in two configurations:
- Fail-secure. Also called fail-locked or non-fail safe. In this configuration, applying electric current to the strike will cause it to unlock. In this configuration, the strike would remain locked in a power failure, but typically the mechanical lock can still be used to open the door from the inside for egress from the secure side. These units can be powered by alternating current, which will cause the unit to buzz, or DC power, which offers silent operation, except for a ‘click’ while the unit is powered.
- Fail-safe. Also called fail-open. In this configuration, applying electric current to the strike will cause it to lock. It operates the same as a magnetic lock would. If there is a power failure, the door opens merely by being pushed or pulled. Fail-safe units are always operated with direct current.
Our Electric Strikes in Madison Includes the Following:
- Electric Door Strikes
- Door Strike Replacement
- Electric Strike Installation
- Door Strike Installation
- Door Strike Installer
- Electric Strike Replacement
- Door Strike Repairs
- Electric Strike Repairs
- Electric Strike Lock Systems
We Provide Electric Strikes in the Following Cities:
- Madison, NJ
- Morristown, NJ
- Chatham, NJ
- Summit, NJ
- Short Hills, NJ
- Morris Plains, NJ
- New Jersey
- Parsippany, NJ
- Livingston, NJ
- Millburn, NJ
- Maplewood, NJ
- Hanover Township, NJ
- Harding Township, NJ
- Bernards Township, NJ
What Madison Homeowners Are Saying About Our Electric Strikes
You guys were incredible to deal with while we were away! Thank you for working with my neighbor to get into my house so our family pet wasn’t left alone until we got home!